OWNER'S GUIDE

HOW TO ADJUST YOUR MON CHOUX MESH STRAP

 

HOW TO CHANGE YOUR MON CHOUX WATCH STRAPS

 

HOW TO RE-SIZE YOUR MON CHOUX LINK WATCH

Step One: Locate The Resizing Tool

Locate your resizing tool which is stored under the watch cushion.

Once you're ready, wind the nozzle anti-clockwise to open the vice. Create a space for your watch to sit securely while removing the pins.

Step Two: Identify How Many Links To Remove

With the original sized watch on your wrist, pinch the band together to gauge how tight or how loose you'd prefer the watch to fit.

Step Three: Removing The Pins

Identify the correct direction to push the pin. One side shows a rounded 'flush end', the other a 'split end'. You must push from the flush end so that the split ends exits first.

Reversing this can damage the band and may require professional repair.

Step Four: Removing The Pins

Place the watch in the vice, aligning the resizing tool's pin with the link hold to meet with the flush end.

Turn the nozzle clockwise to push the pin through as far as it allows. A slight amount of resistance is normal - continue until the pin is fully released.

Step Five: Removing The Links

Once the pin has been pushed through as far as it allows, use your fingers to pull the rest of the pin out. 

Set the pin aside for reassembly.

Step Six: Reconnecting Links

To reconnect, precisely align the band back together. If aligned correctly, you should be able to see straight through the link gap.

Step Seven: Reconnecting Links

Insert the flush end of the pin through the opposite side you removed the pin from in Step Four as far as it allows.

Tip: Inserting the flush end first ensures it can be easily altered if need be in future.

Step Eight: Securing The Links

Place the band back in the vice with the split end aligning with the resizing tool.

Continue turning the nozzle clockwise to push the pin flush with the band's edge.

Remember resistance is normal, this ensures a secure reconnection.